Filter
Top Products
Loading Paper
Chapter 2: Handling Paper
❖
2-25
2
Insert only one sheet
of paper, pre-printed
stationery,
transparency, label
paper, or envelope at a
time into the SBF.
If you are feeding
letterhead, pre-printed
stationery, or drilled
paper, see page 2-27.
See page 2-29 for
envelopes.
For best performance:
a
Stand facing the SBF straight on.
b
Refer to Figure 2.12 (page 2-26) for the proper paper
orientation (long edge or short edge first).
c
Insert the sheet, guided by the side guides, at a
steady rate.
d
Continue to insert the sheet until the lead edge of the
sheet makes contact and a slight buckle forms.
e
To assure that the sheet is being introduced without
skew, apply pressure first on one side of the sheet
and then the other such that the entire lead edge of
the sheet makes full contact.
f
Maintain slight pressure on the sheet until the printer
begins to pull in the sheet.
WUG-CH02 Page 25 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM