Filter
Top Products
Displayed Control Panel Messages
7-10
❖
4520/4520mp User’s Guide
HCF-Lower
HCF or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF-Middle
HCF or middle tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF-Mid-Low
HCF, middle, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF-Upper
HCF or upper tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF-Up-Mid-Low
HCF, upper, middle, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF-Up-Mid
HCF, upper, or middle tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF-Up-Low
HCF, upper, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCF Empty
The HCF does not contain paper.
ACTION: Load paper into the HCF.
Hex Dump
Hex dump mode is
On
.
Used for debugging. See
Hex Dump
(page 3-60).
ACTION: None
Install
EP Cartridge
The EP cartridge is missing or not installed correctly.
ACTION: Reseat existing cartridge or install a new cartridge. See
“Replacing the EP
Cartridge” (page 6-3)
. If problem continues, contact your dealer or Xerox / Rank
Xerox.
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
WUG-CH07 Page 10 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM