Filter
Top Products
Selecting a Paper Source
2-40
❖
4520/4520mp User’s Guide
You do not have a MBF or HCF installed. You want to print
mostly on white A4 paper but sometimes on color A4 paper.
You occasionally print on DL envelopes.
1. Load the upper and middle trays with white A4 paper
stock.
2. Load the lower tray with color A4 paper stock.
3. Set
Source Mapping
for “Upper” to “Upper-Middle.”
4. Set
Source Mapping
for “Lower” to “Lower.”
5. Set
Source Mapping
for “Manual” and “Manual
Envelope” to “Manual.”
6. In either your software application or the Xerox printer
driver, set paper source to:
— Upper tray for A4 pages (white stock).
— Lower tray for A4 pages (color stock).
— Manual for DL envelopes. (You could have also set
paper source to Manual Envelope for DL envelopes.)
The printer will pull white A4 paper from the upper tray until
it is empty and then from the middle tray. It will pull color A4
pages from the lower tray. For each DL envelope, the printer
halts and the Control Panel displays a message requesting a
DL envelope to be manually fed through the SBF. Insert one
envelope into the SBF and it will feed.
Example 5
WUG-CH02 Page 40 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM