Filter
Top Products
PCL Menu
3-28
❖
4520/4520mp User’s Guide
TrueRes
Off
On*
When
On
, smooths the curves in characters and
graphics to reduce coarseness, thereby improving
image quality.
TrueRes
can be overridden by software when the
Xerox printer driver is installed.
State Saving
Off*
On
Reserves memory for saving permanently downloaded
fonts and macros, when the printer switches from
using the PCL printer language to using the PostScript
printer language, or when the printer steps down in
Page Protection
or
Resolution
.
When
Off
, all permanently downloaded fonts and
macros are cleared from memory when switching
PDLs. They must be downloaded again when the
printer switches back to PCL from PostScript.
When
On
, permanently downloaded fonts and
macros are stored in printer memory. You eliminate
the time to download them again when the printer
switches back to PCL.
Temporary fonts and macros are always
cleared at the end of every print job.
State Saving
requires 20 MB of memory if the
PostScript option is installed. If the PostScript option is
not installed,
State Saving
may be selected with 16
MB. This will prevent loss of downloaded PCL fonts
and macros if applications change the setting of
Resolution
or
Page Protection
. Enabling
State
Saving
can have an effect on printing speed with
minimum memory installed. It is recommended that
this option not be enabled without 20 MB of printer
memory. See
“Printer Settings that Affect Memory”
(page 3-69)
for further information.
Figure 3.8 PCL Menu options showing factory settings
(continued)
Option
Setting
Description
Note
WUG-CH03 Page 28 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM