Filter
Top Products
Printer Settings that Affect Memory
3-70
❖
4520/4520mp User’s Guide
Jam Recovery
PCL Menu
(page 3-26)
PostScript Menu
(page 3-34)
A paper jam may cause a page image being printed to become lost. When
Jam Recovery
is
On
, the printer will automatically reprint the image of the
jammed page, after the jam has been cleared.
Because the printer holds a page image in memory longer with
Jam
Recovery
, if a low memory condition occurs there can be a slight
performance impact and the printer may require more memory. If sufficient
memory exists,
Jam Recovery
has no impact.
Resolution
PCL Menu
(page 3-27)
PostScript Menu
(page 3-35)
The printer prints at 800, 600, 400, or 300 dpi. The factory-set default is
600 dpi.
Your software application may be able to set
Resolution
and override the
setting here. Whether a new
Resolution
is set by your application or on
the Control Panel, the new
Resolution
becomes effective with the next
print job or with a printer reset. Unless
State Saving
(page 3-28 for PCL,
page 3-37 for PostScript, and page 3-71) is
On
, downloaded fonts and
macros may be cleared from memory.
The higher the resolution, the more memory required. See
Figure 3.24
(page 3-72)
for memory requirements.
Figure 3.23 PCL and PostScript Menu options that affect performance and memory usage
Option
Description
WUG-CH03 Page 70 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM