Filter
Top Products
Displayed Control Panel Messages
Chapter 7: Troubleshooting
❖
7-21
Warning 300/C5
This message appears in PCL when the printer has changed resolution to 300 or
page protection to C5; appears in PostScript when the page size is C5 and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/DL
This message appears in PCL when the printer has changed resolution to 300 or
page protection to DL; appears in PostScript when the page size is DL and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/EXE
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Executive; appears in PostScript when the page size is Executive
and the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/FOL
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Folio; appears in PostScript when the page size is Folio and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
WUG-CH07 Page 21 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM