Filter
Top Products
Selecting a Paper Source
2-38
❖
4520/4520mp User’s Guide
You do not have a HCF installed. You want to print mostly on
Letter (8.5 x 11) paper but sometimes on Legal (8.5 x 14).
1. Load the upper and middle trays with Letter paper stock.
2. Load the lower tray with Legal paper stock.
3. Set
Source Mapping
for “Upper” to “Upper-Middle.”
4. Set
Source Mapping
for “Lower” to “Lower.”
5. In either your software application or the Xerox printer
driver, set paper source to:
— Upper tray for Letter pages.
— Lower tray for Legal pages.
The printer will pull Letter paper from the upper tray until is
it empty, then from the middle tray. It will pull Legal paper
from the lower tray.
Alternatively, you could set
Source Mapping
for “Upper” to
“Up-Mid-Low” and set your application paper source to the
upper tray for both Letter and Legal pages.
The printer will
automatically switch between the trays according to the
paper size requested
. The disadvantage is that Control Panel
messages may be misleading. Whether alerting you to load
Letter or Legal paper, the Control Panel will always display
“Up-Mid-Low” as the location to load that paper size. You
must know which paper size goes into which tray.
Example 3
WUG-CH02 Page 38 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM