Filter
Top Products
Displayed Control Panel Messages
7-22
❖
4520/4520mp User’s Guide
Warning 300/LDG
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Ledger; appears in PostScript when the page size is Ledger and
the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
Warning 300/LGL
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Legal; appears in PostScript when the page size is Legal and the
printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/LTR
This message appears in PCL when the printer has changed resolution to 300 or
page protection to Letter; appears in PostScript when the page size is Letter and
the printer has changed resolution to 300.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Warning 300/OFF
This message appears in PCL when the printer has changed resolution to 300 or
page protection to OFF.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job prints.
ACTION: None
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
WUG-CH07 Page 22 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM