Filter
Top Products
Displayed Control Panel Messages
Chapter 7: Troubleshooting
❖
7-9
Fuser Failure
Service Required
Fuser assembly has failed; printing cannot resume.
ACTION: Contact your dealer or Xerox / Rank Xerox.
HCEF
Envelopes need to be added to the High-Capacity Envelope Feeder (HCEF).
ACTION: The message on the bottom advises what envelope to load.
HCEF-Mid-Low
HCEF, middle, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Middle
HCEF or middle tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Lower
HCEF or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Up-Low
HCEF, upper, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Up-Mid
HCEF, upper, or middle tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Up-Mid-Low
HCEF, upper, middle, or lower tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF-Upper
HCEF or upper tray needs paper.
ACTION: The message on the bottom line advises what size paper or envelope to
load. Either load that size, or press
Enter
HCEF Empty
The HCEF does not contain paper.
ACTION: Load envelopes into the HCEF.
HCF
Paper needs to be added to the High-Capacity Feeder (HCF).
ACTION: The message on the bottom advises what paper to load.
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
WUG-CH07 Page 9 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM