Filter
Top Products
7 System Administration
128
System Administration
7
3 Select [Save].
Toner Density
Set the toner density.
The factory default value is [Normal].
1 Select [Toner Density].
2 Select from the toner density levels between
[Lighten] and [Darken] using [ ][ ].
3 Select [Save].
Metric / Inch System
Select whether dimensions on the screen are shown in millimeters or inches.
1 Select [Metric / Inch System].
2 Select [Millimeters] or [Inches].
3 Select [Save].
Toner Density Cancel Save
Light
Normal
Dark