Filter
Top Products
Power On / Off
Xerox 6204 Wide Format Solution 25
Product Overview
2
Power On / Off
Switch on the power before operating the machine. The machine is ready for operation
within 2.5 minutes after the power is switched on. Turn off the machine at the end of
the day or when it is not in use for a long period of time. Also, use the Power Saving
feature when not in use for a while to reduce the power consumption.
Note • Switching off the power of the machine may cause loss of data being processed.
Note • The machine consumes electricity at less than 1.5 watt while the power switch is off. Turning
the circuit breaker off or unplugging the power cord from the power outlet is necessary to cut
off the electricity consumption completely.
For information about the power saver feature, refer to the "Power Saver Mode" Section in this chapter.
Powering On
The procedure for turning on the power is as follows.
1 Turn the circuit breaker to the on [ | ] position
on the lower back of the machine.
Note • After the initial installation and startup of the
machine, this step is not always done daily,
because the circuit breaker is generally
turned off only when the machine will not
be used for extended periods of time.
2 Press the power switch to the [ | ] position to turn
the power on.
Note • The "Please wait..." message indicates that the
machine is warming up. The machine cannot
be used while it is warming up. After about 2.5
minutes, the machine becomes ready for use.
Powering Off
The procedure for turning off the power is as follows.
Switching off the power of the machine may cause loss of data being processed.
1 Before turning the power off, make sure that all
copy or print jobs have completely finished. Also,
make sure that the <Transmitting> indicator and
<Jobs in Memory> indicator are not lit.
Important • Never turn the power off in the following
instances:
- While jobs are being printed.
- While jobs are being copied.
- While a scan is being executed.
2 Press the power switch to the < > side.
Important • Power off processing is performed internally on the machine for a while after the power
switch is turned off. Therefore, do not unplug the power cord from the power outlet
immediately after turning off the power switch.
• Do not turn off the circuit breaker (main power switch) while the power switch is on. It may
cause the machine to malfunction.
Note • Before you turn the power back on after turning it off, first make sure that the touch screen
has gone out.
Step 2. Power Switch
Step 1. Circuit Breaker