Filter
Top Products
2 Product Overview
36 Xerox 6204 Wide Format Solution
Product Overview
2
10 Gently slide the Roll 1 or Roll 2 drawer into the
machine until it stops.
11 Close the front doors.
Using the Manual Feed Tray (Bypass)
When using cut sheets to copy or print, load the media from the manual feed tray
(Bypass).
Important • When changing the media types, size, or weight, make sure to change the media settings
before starting to make copies. For information about changing media settings, refer to the
"Media Settings" Section later in this chapter.
1 Open the manual feed tray forward.
2 Align both edges of the media with the size
indicators, and insert the lead edge of media
until it stops.
The media is fed, and it stops moving after it has been fully
fed into the machine.
Important • Load single sheets.
• When the lead edge of media is curled, insert
the media holding the curled part of the media
by your hands.
• Hold the media while it is being fed. If you release the media before it stops, it may result in
paper jams.