Filter
Top Products
Safety Notes
Xerox 6204 Wide Format Solution 9
Before Using the Machine
1
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety
guidelines at all times.
Do These:
z
Always connect equipment to a correctly grounded power outlet. If in doubt, have
the outlet check by a qualified electrician.
- This equipment must be connected to a protective grounded circuit, and the
equipment is supplied with a plug that has a protective grounding pin. This plug
will only fit into a grounded electrical outlet. This is a safety feature. To avaoid risk
of electric shock, contact your electrician to replace the electrical outlet if you are
unable to insert the plug into it. Never use a plug that lacks a grounded connection
terminal to connect the product to an electrical outlet.
z
Always follow all warnings and instructions that are marked on or supplied with the
equipment.
z
Always exercise care when moving or relocating equipment. Please contact your
local Xerox Service Department, or your local support organization to arrange
relocation of the product to a location outside of your building.
z
Always locate the equipment in an area that has adequate ventilation, and has room
for servicing. See the Install Guide for minimum dimensions.
z
Always use materials and supplies specifically designed fro your Xerox equipment.
The use of unsuitable materials may result in poor performance.
z
Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
z
Never use a plug that lacks a grounded connection terminal to connect the product
to an electrical outlet.
z
Never attempt any maintenance function that is not specifically described in this
documentation.
z
This equipment should not be placed in a built-in installation unless proper ventilation
is provided. Please contact your Authorized Local Dealer for further information.
z
Never remove covers or guards that are fastened with screws. There are no
operator serviceable areas within these covers.
z
Never locate the equipment near a radiator or any other heat source.
z
Never push objects of any kind into the ventilation openings.
z
Never override or "cheat" any of the electrical or mechanical interlock devices.
z
Never operate the equipment if you notice unusual noises or odors. Disconnect the
power cord from the electrical outlet and contact your local Xerox Service
Representative or Service Provider immediately.
Maintenance Information
Do not attempt any maintenance procedure that is not specifically descrivbed in the
documentation that is supplied with your copier/printer.
z
Do not use aerosol cleaners. The use of cleaners that are not approved may cause
poor performance of the equipment, and could create a dangerous condition.