2 Product Overview
34 Xerox 6204 Wide Format Solution
Product Overview
2
Loading Media
Loading Roll Media
Set up the roll media on Roll 1 or Roll 2.
Important • When setting the roll media, take care not to pinch your fingers in the machine.
• When changing the media types, size, or weight, make sure to change the media settings
before starting copying. For information about the setting procedure, refer to "Media
Settings" (P.39).
Note • Roll 2 is an optional addition to the machine.
1 Open the front doors.
2 Pull out the drawer for Roll 1 or Roll 2.
3 Remove the shaft of the roll media from the
machine.
4 Pinch the lever at the end of the shaft, and
remove the shaft from the core of the roll media.
Note • Pinching the lever releases the lock of the roll
media, and you can remove the shaft.