Filter
Top Products
10 Problem Solving
172
Problem Solving
10
Images on the
print are skewed.
Is the paper media loaded
correctly?
Load the paper media correctly.
Refer to "Loading Media" (P.34).
Is the media tray set
correctly?
Firmly push in the media tray until it stops
to set it correctly.
Refer to "Loading Media" (P.34).
Part of the image
is missing on the
print.
(smudged,
unclear) .
Is the paper media damp? If the paper media is damp, either some
parts of the copy are not shown or the copy
is smudged and unclear. Replace with
paper media from a new ream.
Refer to "Loading Media" (P.34).
Is the loaded paper media
folded or wrinkled?
Remove the defective paper media and
replace with paper media from a new ream.
Refer to "Loading Media" (P.34).
Dirt appears at
equal intervals.
Dirt on the paper feed path. Print a few pages.
Internal components are
dirty.
Contact your Xerox Customer Support
Center.
The print has
black dots.
Internal components are
dirty.
Contact your Xerox Customer Support
Center.
The print has
black lines.
Internal components are
dirty.
Contact your Xerox Customer Support
Center.
Symptoms Check Remedy