Filter
Top Products
Interrupting a Copy Job
Xerox 6204 Wide Format Solution 49
Copy
3
Interrupting a Copy Job
You can interrupt a continual copy or print job for an urgent copy job. The feature
settings for the current copy job are saved without change.
Note • The following operations are disabled during interruptions.
Interrupting the copy job for another copy
Copying from the memory
• The collated output is disabled during interruptions.
• You cannot interrupt a scan job for a copy job.
1 Press the <Interrupt> button on the control
panel.
The <Interrupt> indicator is blinking. It indicates the
interrupt has been requested. The current processing job is
suspended.
When the interrupt is ready, the <Interrupt> indicator is lit.
2 When the suspended job is stopped, the [Menu]
screen appears. Select [Copy].
Note • When the suspended job was copying, the
[Copy] screen appears without displaying the
[Menu] screen.
3 Select the settings such as the magnification
percent for the new job to be processed during
the interruption.
4 Enter the required number of copies (1 to 99)
using the numeric keypad.
5 Set the original in alignment with the original guide.
For information about the procedure to set the original, refer to "Step 3 Scanning the Original" (P.43).
6 When the new job (interrupt job) is completed, press the <Interrupt>button again.
The interrupt mode is cancelled, and the suspended job restarts.
Note • The interruption mode will be automatically canceled after 30 seconds has elapsed without
copy operation.
4
7
2
5
8
0
3
6
9
Transmitting
Machine Status
Log In/Out
Jobs in Memory
Original/
Copy
Scan
Menu
Power Saver
Clear All
Copy from
Stop
Start
Interrupt
Media Settings
Memory
.
C
1
<Interrupt> button
Menu
Copy
Scan
Basic Copy
Image Quality
More Features
Media Supply
Media Type
Select
2 A1
Media Cut Mode
Standard
Bond
Bond
Vellum
Film
Reduce / Enlarge
100.0%
A0 A2
More...
More...
Auto %
Auto
50.0%
1 A0
Bond