Filter
Top Products
Power Saver Mode
Xerox 6204 Wide Format Solution 27
Product Overview
2
Power Saver Mode
The machine comes with a Power Saver feature that will automatically cut off the
electricity to the machine if no copy or print data is received for a certain duration.
The Power Saver feature has two modes, [Low Power mode] and [Sleep mode].
The machine enters the [Low Power mode] after the preset time has elapsed if the
machine is left unused for a fixed period of time.
The machine then enters the [Sleep mode] if a further preset time elapses.
Low Power Mode
(Power consumption: 250 W)
In this mode, the power to the control panel and fuser unit is lowered to save power.
The touch screen goes out, and the <Power Saver> button on the control panel lights.
To use the machine, press the <Power Saver> button and the button will go out,
indicating that the Power Saver feature is canceled.
Sleep Mode
(Power consumption: 25 W)
In this mode, the power is lowered more than in the Low Power mode.
When the machine enters the [Low Power mode] or the [Sleep mode], the touch screen
goes out, and the <Power Saver> button on the control panel lights. To use the
machine, press the <Power Saver> button. The <Power Saver> button goes out to
indicate that the Power Saver feature is canceled.
"Rest Cut" Feature
: When the Power Switch is left on and the machine has "rested"
in Sleep mode for a period of time (such as overnight), the machine will automatically
feed out (and cut) a blank piece paper about 8 inches long (210 mm) before the first
item is printed. This feature is there because the part of the sheet that remained "fed
in" to the printer during the "Sleep" period can develop minor dimples which can cause
deletions in the first print.
Changing the Power Saver Mode Change Interval
The procedure for setting the Power Saver feature is as follows.
To activate the Power Saver feature, set both the times until the activation of Low
Power Mode and Sleep Mode.
Note • The time to activation of Low Power Mode and Sleep Mode can each be set in 1 minute
increments, from 5 to 240 minutes.
1 Press the <Log In/Out> button.
Scan
<Log In/Out> button