Filter
Top Products
11-21
Initialization Commands
Window Subtitle
Initialization File: subTitle="subtitle"
Command Line: -st"subtitle"
Default Setting: Untitled
These commands enable you to specify a subtitle for display in the title bar of a
specific TeemTalk window. By default the subtitle is the name of the session.
Soft Buttons Displayed
Initialization File: buttonlevels=0-4
Command Line: -bl0-4
Default Setting: 1
A set of soft buttons is displayed at the bottom of the TeemTalk window by default.
There are four soft button levels. Level 1 is displayed by default. Each level consists
of twelve programmable buttons, providing a combined total of 48 buttons. You can
display all four levels (48 buttons) at the same time if required. All levels are
accessible even if not all are displayed, levels stored off-screen can be 'scrolled' into
view by clicking the Level button.
You can specify how many soft button levels are actually displayed by using this
initialization file command or command line option. All four levels can be displayed
by specifying 4. Specifying 0 will cause no soft buttons to be displayed.
Disable Status Bar
Initialization File: statusline=off
Command Line: -v
Default Setting: on
These commands will remove the status bar at the bottom of the window.
Default Font Size
Initialization File: defaultFontIndex=index
Command Line: -dfindex
Default Setting: Depends on the display adaptor
The size of the font used by default when TeemTalk is loaded usually depends on the
type of display adaptor in your system. However, you can specify a different default