Filter
Top Products
7-4
Setup Menus
When an option has many possible settings, these will be shown in a list box. The
Baud Rate option in the Serial Settings dialog box is an example of this. To make a
selection using the mouse, click the arrow button to display a drop-down list box then
click on the setting required. If the list is long a scroll bar may be displayed. To make
a selection using the keyboard, press the up or down arrow keys to cycle through the
available settings until the one required is highlighted in the box.
To select a dialog box option:
Mouse: Click the check box, button or list box. The current setting is high-
lighted or surrounded by a dotted rectangle, or both.
Keyboard: Press the Tab key to move forward through the options (left to right,
top to bottom), or Shift + Tab to move backwards, until the required
option is highlighted or surrounded by a dotted rectangle, or both. Press
the Spacebar to toggle check boxes or buttons on or off.
To close a dialog box without actioning changes:
Mouse: Click the Cancel button.
Keyboard: Press the Tab or Shift + Tab keys to move the cursor until it rests over
the Cancel button and press Return or the Spacebar.
To close a dialog box and action changes:
Mouse: Click the OK button.
Keyboard: Press Return.
Default Settings
TeemTalk is supplied with the setup options set to factory default. If these have been
altered since and you wish to reassert the original settings of all the options, display
the File menu and select the Factory Default option.
Some dialog boxes include a Default button to enable the factory default settings of
options contained in the dialog box to be reasserted.