Filter
Top Products
7-11
Setup Menus
The status line along the bottom of the window displays two LEDs. The first LED
indicates whether or not you are connected to the host. It will show red when not
connected and green when you are connected. The second LED indicates whether or
not data is being sent to or from the host. It will show dull green when there is no
activity, red when data is being sent to the host, and bright green when data is being
received from the host.
Connection to the network host node will close if you change the settings in the New
Connection dialog box and attempt to connect, if you log out of the host, or the host
closes the connection. Warning messages will be displayed if the host closes the
connection, or you attempt to open a new session or exit TeemTalk while a session is
open. These message boxes can be disabled using initialization file commands or
command line options. Refer to the Initialization Commands chapter for details.
Open Session...
This enables you to select a connection template for TeemTalk to use. The following
dialog box will be displayed.
The Description list box displays the one-line descriptions of connection templates
that were created using the Save Session As dialog box. The description of the
connection template currently in use is highlighted. The factory default connection
template is Untitled. Clicking one of the descriptions then the OK button will cause
TeemTalk to use the connection template associated with the chosen description.
You can make TeemTalk automatically use a particular connection template when it is
loaded or reset by clicking the required description, checking the Save As Default
check box, then clicking the OK button. To delete a connection template, select the
description then click the Delete button.
Close Session
This will close the current session.