Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide — IP / IPX
Chapter 2 IP Performance Configuration
Commands
2-4
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0
Table 2-3 Description on the fields of the display icmp statistics command
Field Description
bad formats Number of input packets in bad formats
bad checksum Number of input packets with bad checksum
echo Number of input/output echo request packets
destination unreachable
Number of input/output packets with unreachable
destination
source quench Number of input/output source quench packets
redirects Number of input/output redirected packets
echo reply Number of input/output echo reply packets
parameter problem
Number of input/output packets with parameter
problem
timestamp Number of input/output timestamp packets
information request Number of input information request packets
mask requests Number of input/output mask request packets
mask replies Number of input/output mask reply packets
information reply Number of output information reply packets
time exceeded Number of time exceeded packets
2.1.3 display ip socket
Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameter
sock-type: Type of a socket, ranging from 1 to 3. These values correspond to
SOCK_STREAM (TCP socket), SOCK_DGRAM (UDP socket or socket based on the
link layer), and SOCK_RAW (RAW IP socket).
task-id: ID of a task, with the value ranging from 1 to 100.
socket-id: ID of a socket, with the value ranging from 0 to 3072.