Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON Chapter 1 SNMP Configuration Commands
1-16
Use undo snmp-agent target-host command to cancel the current setting.
The snmp-agent target-host command and the snmp-agent trap enable or enable
snmp trap updown command must be used at the same time on the device to send
Trap packets.
1) Use the snmp-agent trap enable or enable snmp trap updown command to set
Trap packets allowed to send (all Trap packets can be sent by default).
2) Use the snmp-agent target-host command to set the address of the destination
host receiving SNMP Trap packets.
Related command: snmp-agent trap enable, snmp-agent trap source and
snmp-agent trap life.
Example
# Enable sending SNMP Trap packets to 10.1.1.1 with community name public.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent trap enable standard
[3Com] snmp-agent target-host trap address udp-domain 10.1.1.1 params
securityname public
1.1.17 snmp-agent trap enable
Syntax
snmp-agent trap enable [ bgp [ backwardtransition | established ]* | configuration
| flash | ospf [ process-id ] [ ospf-trap-list ] | standard [ authentication | coldstart |
linkdown | linkup | warmstart ]* | system | vrrp [ authfailure | newmaster ] ]
undo snmp-agent trap enable [ bgp [ backwardtransition | established ]* |
configuration | flash | ospf [ process-id ] [ ospf-trap-list ] | standard [ authentication
| coldstart | linkdown | linkup | warmstart ]* | system | vrrp [ authfailure |
newmaster ] ]
View
System view
Parameter
bgp [ backwardtransition | established ]*: Configures to send BGP traps.
configuration: Configures to send traps for configuration.
flash: Configures to send traps of Flash.
ospf [ process-id ] [ ospf-trap-list ]: Configures to send traps of the OSPF protocol.
process-id indicates a process ID. ospf-trap-list indicates a list of trap messages
allowed to be sent.