Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-23
Caution:
z You are recommended to configure the VLAN assignment mode for the switch the
same as that of the assignment attribute value of the RADIUS authentication server.
Configure the correct assignment mode with the vlan-assignment-mode
command so that the switch correctly identifies the dynamic VLAN assigned by the
server. If the assignment modes are different, the expected configuration may not
take effect.
z In string mode, the VLAN to be assigned must exist on the switch and must have
been configured with a VLAN name. This is not required in integer mode.
z In string mode, if the VLAN ID assigned by the RADIUS server is a character string
containing only digits (for example, 1024), the switch first regards it as an integer
VLAN ID: the switch transforms the string to an integer value and judges if the value
is in the valid VLAN ID range; if it is, the switch adds the authenticated port to the
VLAN with the value as the VLAN ID (VLAN 1024, for example).
Related command: name, dot1x guest-vlan
Example
# Set the VLAN assignment mode to string.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] domain aabbcc.net
New Domain added.
[3Com-isp-aabbcc.net] vlan-assignment-mode string
1.2 RADIUS Configuration Commands
1.2.1 accounting-on enable
Syntax
accounting-on enable [ send times | interval interval ]
undo accounting-on { enable | send | interval }
View
RADIUS scheme view
Parameter
times: Maximum number of attempts to send Accounting-On packets, ranging from 1 to
256 and defaulting to 40.