Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-6
network network: Displays the network number information of the specified server.
The network number comprises eight hexadecimal numbers and is in the range of 0x1
to 0xFFFFFFFF. The leading 0s can be omitted when you input a network number.
order { network | type }: Displays the service information by network number or by
service type.
type service-type: Displays the service information with a specified service type. It
comprises four hexadecimal numbers, ranging from 0 to FFFF. 0 indicates all the
service types.
verbose: Displays the detailed service information.
Description
Use the display ipx service-table command to view the contents of the IPX service
information table.
Example
# View the contents of the IPX service information table.
[3Com] display ipx service-table
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which the
service is received
Number of Static Entries: 2
Number of Dynamic Entries: 0
Name Type NetId
S Prn1 0005 000d
S Prn2 0005 0008
# View the details about the IPX service information table.
[3Com] display ipx service-table verbose
Abbreviation: S - Static, Pref - Preference(Decimal), NetId - Network number,
NodeId - Node address, hop - Hops(Decimal), Recv-If - Interface from which the
service is received
Number of Static Entries: 2
Number of Dynamic Entries: 0
Name Type NetId NodeId Sock Pref Hops Recv-If
S Prn1 0005 000d 000a-000a-000a 0452 500 02 Vlan-interface1
S Prn2 0005 0008 000a-000a-000a 0452 500 03 Vlan-interface1