Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 1 Static Route Configuration Commands
1-5
Field Description
Static
The static routes manually configured on the route are
tagged as static routes, which will not be removed from
the routing table if the router is restarted after the save
command is executed.
Unicast Unicast routes
Age
The time that a route exists in the routing table, expressed in the form
of hh:mm:ss.
Cost Route cost
Tag Route tag
1.1.3 display ip routing-table ip-address
Syntax
display ip routing-table ip-address [ mask ] [ longer-match ] [ verbose ]
View
Any view
Parameter
ip-address: Destination IP address, in dotted decimal notation.
mask: IP address mask, length in dotted decimal notation or expressed as an integer.
It ranges from 0 to 32 when expressed as an integer.
longer-match: Specifies all the routes that lead to the destination address and match
the specified mask. If you do not specify the mask argument, those that match the
natural mask are specified.
verbose: With the verbose argument specified, this command displays the verbose
information of both the active and inactive routes. Without the argument specified, this
command only displays the summary of active routes.
Description
Use the display ip routing-table ip-address command to display the routing
information of the specified destination address.
With different arguments provided, the command output is different. The following is
the command output with different arguments provided:
z display ip routing-table ip-address
If the destination address ip-address corresponds to a route in the natural mask range,
this command displays the route that is the longest match of the destination address
ip-address and is active.