Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – DHCP Chapter 1 DHCP Server Configuration Commands
1-17
IP Range from 4.0.0.0 to 4.255.255.255
IP Range from 5.5.5.0 to 5.5.5.0
IP Range from 5.5.5.2 to 5.5.5.255
1.1.18 display dhcp server ip-in-use
Syntax
display dhcp server ip-in-use { ip ip-address | pool [ pool-name ] | interface
[ interface-type interface-number ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string
of 1 to 35 characters, is the name of an address pool. If you do not provide this
argument, this command applies to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not
specify a VLAN interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.
Description
Use the display dhcp server ip-in-use command to display the address binding
information of one IP address, the specified DHCP address pool(s) or all DHCP
address pools.
Related command: reset dhcp server ip-in-use.
Example
# Display the address binding information of all DHCP address pools.
<3Com> display dhcp server ip-in-use all
Global pool:
IP address Hardware address Lease expiration Type
2.2.2.2 44444-4444-4444 NOT Used Manual
Interface pool:
IP address Hardware address Lease expiration Type
5.5.5.1 0050-ba28-930a Jun 5 2003 10:56: 7 AM Auto:COMMITED
--- total 2 entry ---