Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-28
View
Any view
Parameter
radius-scheme-name: Name of a RADIUS scheme, a character string of up to 32
characters. If this argument is not specified, this command displays the configuration
information about all RADIUS schemes.
Description
Use the display radius command to display the configuration information about one
specific or all RADIUS schemes.
By default, this command displays the configuration information about all RADIUS
schemes.
Related command: radius scheme.
Example
# Display the configuration information about all RADIUS schemes.
<3Com> display radius
------------------------------------------------------------------
SchemeName =system Index=0 Type=3Com
Primary Auth IP =127.0.0.1 Port=1645 State=active
Primary Acct IP =127.0.0.1 Port=1646 State=active
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= 3Com
Acct Server Encryption Key= 3Com
Accounting method = required
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Source-IP-address =0.0.0.0
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed