Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 4 Integrated IS-IS Configuration Commands
4-5
interval between SPFs: level-1 10
level-2 10
4.1.5 display isis interface
Syntax
display isis interface [ verbose ]
View
Any view
Parameter
verbose: Displays the detailed information about the interface.
Description
Use the display isis interface command to view the information about the
IS-IS-enabled interfaces.
The information displayed by this command includes the interface name, interface IP
address, interface link state and so on. Besides all the information displayed by the
display isis interface command, the display isis interface verbose command will
display the IS-IS configuration information related to the interface, such as CSNP
packets broadcast intervals, Hello packets broadcast intervals and the number of
invalid Hello packets.
Example
# Display the information about the IS-IS-enabled interface.
<3Com> display isis interface
Interface IP Address Id Link.Sta IP.Sta MTU Type DIS
Vlan-interface1 172.16.1.2 001 Up Up 1497 L1 No/No
# Display the detailed information about the IS-IS-enabled interface.
<3Com> display isis interface verbose
Interface IP Address Id Link.Sta IP.Sta MTU Type DIS
Vlan-interface1 172.16.1.2 001 Up Up 1497 L1 No/No
Secondary IP Address :
Csnp Interval : L1 10 L2 10
Hello Interval : L1 10 L2 10
Hold Time : L1 30 L2 30
Lsp Interval : 33
Cost : L1 10 L2 10
Priority : L1 64 L2 64
Retransmission interval : 5