Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-18
Related command: radius scheme and display radius
Example
# Specify the RADIUS scheme "3Com" as the AAA scheme referenced by the ISP
domain "aabbcc.net".
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] domain aabbcc.net
New Domain added.
[3Com-isp-aabbcc.net] scheme radius-scheme 3Com
1.1.17 self-service-url
Syntax
self-service-url enable url-string
self-service-url disable
View
ISP domain view
Parameter
url-string: URL of the web page used to modify user password on the self-service server.
It is a character string with 1 character to 64 characters. This string cannot contain a
question mark "?". If the actual URL of the self-service server contains any question
mark, you should change it to an elect bar "|".
Description
Use the self-service-url enable command to enable the self-service server location
function
Use the self-service-url disable command to disable the self-service server location
function
By default, this function is disabled.
This command must be used with the cooperation of a self-service-supported RADIUS
server (such as CAMS). Through self-service, users can manage and control their
accounts or card numbers by themselves. A server installed with the self-service
software is called a self-service server.
After this command is executed on the switch, users can locate the self-service server
through the following operation:
z Choose [change user password] on the 802.1x client.
z The client opens the default browser (for example, IE or Netscape) and locates the
specified URL page used to change user password on the self-service server.