Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service
Chapter 1 SSH Terminal Service
Configuration Commands
1-35
Parameter
remote-path: Name of a directory on the remote SFTP server.
Description
Use the rmdir command to delete the specified directory from the remote SFTP server.
Example
# Delete directory hello from the remote SFTP server.
sftp-client>rmdir hello
The followed directory will be deleted
flash:/hello
Are you sure to remove it?(Y/N):y
Directory successfully removed
1.4.17 sftp
Syntax
sftp { host-ip | host-name } [ port-num ] [ prefer_kex { dh_group1 |
dh_exchange_group } ] [ prefer_ctos_cipher { des | aes128 } ] [ prefer_stoc_cipher
{ des | aes128 } ] [ prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
[ prefer_stoc_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
View
System view
Parameter
host-ip: IP address of the server.
host-name: Name of the server, a string of 1 to 20 characters.
port-num: Port number of the server, in the range 0 to 65,535. The default port number
is 22.
prefer_kex: Key exchange algorithm preference. Choose one of the two algorithms
available.
dh_group1: Diffie-Hellman-group1-sha1 key exchange algorithm. It is the default key
exchange algorithm.
dh_exchange_group: Diffie-Hellman-group-exchange-sha1 key exchange algorithm.
prefer_ctos_cipher: Encryption algorithm preference from the client to server. It
defaults to AES128.
prefer_stoc_cipher: Encryption algorithm preference from the server to client. It
defaults to AES128.