Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-52
3.1.47 silent-interface
Syntax
silent-interface Vlan-interface Vlan-interface-number
undo silent-interface Vlan-interface Vlan-interface-number
View
OSPF view
Parameter
Vlan-interface-number: Interface number.
Description
Use the silent-interface command to disable an interface from transmitting OSPF
packet.
Use the undo silent-interface command to restore the default setting.
By default, the interface is enabled to transmit OSPF packet.
To prevent the router on some network from receiving the OSPF routing information,
you can use this command to disable this interface from transmitting OSPF packet.
On the switch, this command can be used to enable/disable OSPF packet
transmission through the specified VLAN interface.
Example
# Disable interface Vlan-interface 20 from transmitting OSPF packet.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ospf 1
[3Com-ospf-1] silent-interface Vlan-interface 20
3.1.48 snmp-agent trap enable ospf
Syntax
snmp-agent trap enable ospf [ process-id ] [ ifstatechange | iftxretransmit |
ifrxbadpkt | ifcfgerror | virifstatechange | nbrstatechange | virnbrstatechange |
virifcfgerror | ifauthfail | virifauthfail | virifrxbadpkt | viriftxretransmit |
originatelsa | maxagelsa | lsdboverflow | lsdbapproachoverflow ]*
undo snmp-agent trap enable ospf [ process-id ] [ ifstatechange | iftxretransmit |
ifcfgerror |virifstatechange | nbrstatechange | virnbrstatechange | virifcfgerror |
ifauthfail | virifauthfail | ifrxbadpkt | virifrxbadpkt | viriftxretransmit | originatelsa
| maxagelsa | lsdboverflow | lsdbapproachoverflow ]*