Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-36
Related command: key, radius scheme and state.
Example
# Set the IP address and UDP port number of the primary accounting server of the
RADIUS scheme radius1 to 10.110.1.2 and 1813.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] primary accounting 10.110.1.2 1813
1.2.12 primary authentication
Syntax
primary authentication ip-address [ port-number ]
undo primary authentication
View
RADIUS scheme view
Parameter
ip-address: IP address, in dotted decimal notation.
port-number: UDP port number, ranging from 1 to 65535.
Description
Use the primary authentication command to set the IP address and port number of
the primary RADIUS authentication/authorization server.
Use the undo primary authentication command to restore the default IP address and
port number of the primary RADIUS authentication/authorization server.
The IP address and UDP port number of the primary authentication server used by the
default RADIUS scheme "system" are 127.0.0.1 and 1645. The IP address and UDP
port number of the secondary authentication server is 0.0.0.0 and 1812. The IP address
and the UDP port number of the primary/secondary authentication server used by a
newly created RADIUS scheme are 0.0.0.0 and 1812.
After creating a new RADIUS scheme, you should configure the IP address and UDP
port number of each RADIUS server you want to use in this scheme. These RADIUS
servers fall into two types: authentication/authorization, and accounting. And for each
kind of server, you can configure two servers in a RADIUS scheme: primary and
secondary servers.
In an actual network environment, you can configure the above parameters as required.
But you should configure at least one authentication/authorization server and one