Filter
Top Products
3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-2
Parameter
None
Description
Use the display info-center command to display the operation status of information
center, the configuration of information channels, and the format of time stamp.
If the information records in the current log/trap buffer are less than the buffer size
specified by a user, this command displays the actual log/trap information.
Related command: info-center enable, info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel, info-center trapbuffer,
info-center snmp channel, and info-center timestamp.
Example
# Display information about information center.
<3Com> display info-center
Information Center:enabled
Log host:
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:2, channel number:4, channel name:logbuffer
dropped messages:0, overwritten messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwritten messages:0
Information timestamp setting:
log - date, trap - date, debug – boot
Table 1-1 Description on the fields of the display info-center command
Field Description
Information Center: Information center is enabled.
Log host:
Information about the log host, including its IP
address, name and number of information channel,
language and level of the log host