Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON Chapter 2 RMON Configuration Commands
2-3
Event table 1 owned by abc is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 2-2 Description on the fields of the display rmon event command
Field Description
Event table Event entries
abc Entry creator
VALID The entry corresponding to the index is valid
Description Event description
Will cause log-trap when triggered The event triggers logs and an trap alarm
last triggered at 0days 00h:02m:27s Time the latest event is triggered
2.1.3 display rmon eventlog
Syntax
display rmon eventlog [event-entry ]
View
Any view
Parameter
event-entry: Event entry index, in the range of 1 to 65535. If you do not specify this
argument, the log of all the event entries is displayed.
Description
Use the display rmon eventlog command to display the log of a specified event entry
or all the event entries.
The displayed information includes: the indexes and status of the event entries in the
event table, the time (in seconds) when an event log is generated (in terms of the time
elapsed since the system is started or initialized), and the event description.
Example
# Display the log generated by the event entry numbered 1.
<3Com> display rmon eventlog 1
Event table 1 owned by abc is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.