3Com 7750 Series Switch User Manual


  Open as PDF
of 1177
 
3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-11
View
System view
Parameter
host-ip-addr: IP address of info-center loghost.
channel: Configures information channel of the info-center loghost.
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
facility: Configure the recording tool of info-center loghost.
local-number: Record tool of info-center loghost, ranging from local0 to local7.
language: Sets the logging language.
chinese,english: Switches language used in log file between Chinese and English.
Description
Use the info-center loghost command to enable information output to loghost by
setting the IP address of the loghost.
Use the undo info-center loghost command to cancel the configuration.
By default, the system does not output information to loghost.
This command works only when the information center function is enabled for the
system.
Note:
Be sure to set the correct IP address in the info-center loghost command. A
loopback IP address will cause an error message prompting invalid address.
Related command: info-center enable and display info-center.
Example
# Configure the Ethernet switch to send information to the workstation Unix whose IP
address is 202.38.160.1.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center loghost 202.38.160.1