Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands
5-29
Parameter
protocol: Source routing protocols which can be imported, including direct, ospf,
ospf-ase, ospf-nssa, rip, isis and static at present.
process-id: Specific process ID, in the range of 1 to 65535. This argument is valid only
when the protocol argument is “ospf”.
med-value: MED value of an imported route, in the range of 0 to 4294967295.
Route-policy-name: Name of a route policy used for filtering routes generated by
other routing protocols, containing 1 to 19 characters.
med med-value: Specifies the MED value loaded by the imported route.
route-policy route-policy-name: Specifies a route-policy to filter routes before
importing. The route-policy-name argument is an alphanumeric string of 1 to 19
characters.
Description
Use the import-route command to import and advertise routes of other protocols.
Use the undo import-route command to cancel the existing configuration.
By default, BGP does not import and advertise routes of other protocols.
Example
# Import routes of RIP.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] import-route rip
5.1.30 network
Syntax
network network-address [ mask ] [ route-policy route-policy-name ]
undo network network-address [ mask ] [ route-policy route-policy-name ]
View
BGP view
Parameter
network-address: IP address of the destination network segment.
mask: Subnet mask.
Route-policy-name: Route policy used for the advertised route, containing 1 to 19
characters.