Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-40
1.2.16 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View
User view
Parameter
radius-scheme radius-scheme-name: Deletes the buffered stop-accounting requests
depending on the specified RADIUS scheme. radius-scheme-name is the name of a
RADIUS scheme. This name is a character string of up to 32 characters.
session-id session-id: Deletes the buffered stop-accounting requests depending on
the specified session ID. Where, session-id is a character string of up to 50 characters.
time-range start-time stop-time: Deletes the buffered stop-accounting requests
depending on the time of the stop-accounting request. Where, start-time is the start
time of the request period, the stop-time is the end time of the request period, and both
are in the format hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd. With this argument
specified, this command displays the buffered stop-accounting requests from the start
time to the end time.
user-name user-name: Deletes the buffered stop-accounting request packets
depending on the specified user name. user-name is a character string of up to 32
characters.
Description
Use the reset stop-accounting-buffer command to delete the buffered no-response
stop-accounting request packets.
When the switch sends out a stop-accounting packet but gets no response from the
RADIUS server, it first buffers the packet and then retransmits it until the maximum
number of retransmission attempts (set by the retry stop-accounting command) is
reached.
The reset stop-accounting-buffer command is used to delete the stop-accounting
request packets buffered in the switch. You can choose to delete the buffered
stop-accounting packets of a specified RADIUS scheme, session ID, or user name. You
can also specify a time range to delete the stop-accounting packets sent within the
specified time range.
Related command: stop-accounting-buffer enable, retry stop-accounting and
display stop-accounting-buffer.