Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – DHCP Chapter 1 DHCP Server Configuration Commands
1-9
Use the undo dhcp server ip-pool command to remove a specified DHCP address
pool.
By default, no global DHCP address pool is created.
Related command: dhcp enable.
Example
# Create DHCP address pool 0.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-pool-0]
1.1.10 dhcp server nbns-list
Syntax
VLAN interface view:
dhcp server nbns-list ip-address&<1-8>
undo dhcp server nbns-list { ip-address | all }
System view:
dhcp server nbns-list ip-address&<1-8> { interface interface-type interface-number
[ to interface-type interface-number ] | all }
undo dhcp server nbns-list { ip-address | all } { interface interface-type
interface-number [ to interface-type interface-number ] | all }
View
System view/VLAN interface view
Parameter
ip-address&<1-8>: IP address of a NetBIOS server. &<1-8> means you can provide up
to eight NetBIOS server IP addresses. When inputting more than one NetBIOS server
IP address, separate two neighboring IP addresses with a space.
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies the interface(s), through which you can specify the corresponding interface
address pool(s).
all: (In comparison with the ip-address argument) Specifies all NetBIOS server IP
addresses.
all: (In comparison with the interface keyword) Specifies all interface address pools.