Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-45
Related command: key, radius scheme and state.
Example
# Set the IP address and UDP port number of the secondary accounting server of the
RADIUS scheme radius1 to 10.110.1.1 and 1813.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] secondary accounting 10.110.1.1 1813
1.2.21 secondary authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS scheme view
Parameter
ip-address: IP address, in dotted decimal notation. By default, the IP address of the
secondary authentication/authorization server is 0.0.0.0.
port-number: UDP port number, ranging from 1 to 65535. By default, the UDP port
number of the secondary authentication/authorization service is 1812.
Description
Use the secondary authentication command to set the IP address and port number of
the secondary RADIUS authentication/authorization server.
Use the undo secondary authentication command to restore the default IP address
and port number of the secondary RADIUS authentication/authorization server.
See the description on the primary authentication command for details.
Related command: key, radius scheme and state.
Example
# Set the IP address and UDP port number of the secondary
authentication/authorization server used by the RADIUS scheme radius1 to 10.110.1.2
and 1812.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] secondary authentication 10.110.1.2 1812