Filter
Top Products
3Com Switch 7750 Series
Command Reference Guide – 802.1x Chapter 1 802.1x Configuration Commands
1-9
1.1.6 dot1x max-user
Syntax
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]
View
System view, Ethernet port view
Parameter
user-number: Maximum number of users a port can accommodate, ranging from 1 to
1024. The default number is 1024.
interface-list: List of Ethernet ports, expressed as interface-list = { interface-name [ to
interface-name ] } & < 1-10 >. The interface-name argument specifies the port index of
an Ethernet port and can be specified in this form: interface-name = { interface-type
interface-num }, where interface-type specifies the type of a port and interface-num
identifies the port number. "&<1-10>" means that up to 10 port indexes/port index lists
can be provided.
Description
Use the dot1x max-user command to set the maximum number of supplicant systems
an Ethernet port can accommodate.
Use the undo dot1x max-user command to revert to the default maximum supplicant
system number.
When being executed in system view, these two commands apply to all Ethernet ports
of the switch if you do not provide the interface-list argument. And if you specify the
interface-list argument, these commands apply to the specified Ethernet ports.
When being executed in Ethernet port view, these two commands apply to the current
Ethernet port only. In this case, the interface-list argument is not needed.
Related command: display dot1x.
Example
# Configure the maximum number of users that Ethernet 3/01 can accommodate to be
32.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] dot1x max-user 32 interface Ethernet 3/0/1