Filter
Top Products
Managing the AMASS File System
6-00028-01 Rev A Command Reference 3-45
Manually Load New Volumes
Introduce new volumes to both the File System Database and to
the library interface by performing the following procedure:
Step 1. Make sure the power is off.
Step 2. Log in as either amass or root.
Step 3. Manually load media directly into a home storage
slot or remove media from a slot.
Step 4. Run the appropriate command from the following
list to update the library interface:
• AML - run the inventory command from DAS
if you are using an AML.
• IBM - run a similar command from LMCPD if
you are using an IBM.
• StorageTek ACS - run a similar command from
the ACSLS Server if you are using a StorageTek
ACS.
Step 5. Run the bulkload -s command to synchronize the
File System Database to the library interface.
WARNING
Power off the library before opening the library door.
# su root
# bulkload -s