Filter
Top Products
Managing the AMASS File System
6-00028-01 Rev A Operational Tasks 2-23
Remove Media From Library
The following steps describe how to remove a volume after it
has been written to by AMASS.
Note
For detailed information on the commands used in these steps, see
the "Command Reference" chapter.
Step Command Description
1 When you installed AMASS, you accept the default value
for the
omm_timeout (Offline Media Management)
parameter, which is 120 seconds (2 minutes).
2 Clients wrote files to a volume for example volume number
47.
3 Log in as
amass or root.
4
volstat -i volumenumber
For example:
volstat -i 47
Mark the specified volume
INACTIVE in the AMASS File
System Database.
5A For SCSI-attached libraries:
voloutlet volumenumber
For example:
voloutlet 47
Ejects the volume from the
library.
AMASS marks it OFFLINE in
the File System Database.
5B For network-attached libraries:
bulkoutlet -u
For example:
bulkoutlet 47
Ejects multiple volumes from
the library.
AMASS marks them OFFLINE
in the File System Database.