Filter
Top Products
Managing the AMASS File System
3-144 Command Reference 6-00028-01 Rev A
Step 2. If the source volume is not in its home storage slot,
use the mediamove utility to move the source
volume to its slot in the library.
When the volcopy process starts, the source volume
must be in its home storage slot.
Step 3. To move the destination media to a position in the
library, use the mediamove utility. For complete
information on this utility, see “mediamove” on
page 4-36.
Step 4. Run the volcopy command as shown in the
following example:
AMASS performs the following tasks:
• Loads the destination media from the
standalone to a drive. If the volume needs
formatting, AMASS performs this task.
• While the source volume is being copied,
AMASS marks it as unavailable for both reads
and writes.
# volcopy -cv -f 6 n/a 2
The destination media is located
in a standalone drive (n/a).
Library
number is 2
Verifies (-v) the copy (-c) process.
Force (-f) a copy.
The source volume number is 6.