Filter
Top Products
Managing the AMASS File System
4-34 Utility Reference 6-00028-01 Rev A
View Status for All Elements
Step 1. Log in as root.
Step 2. To display the status for all elements in library
number 2, enter the path, utility, and options similar
to what is shown in the following example:
Step 3. If you have a SCSI-attached library, the output is
similar to the example in the following example:
# su root
# cd /usr/amass/utils
# medialist -j 2
TRANSPORT 1 EMPTY
SLOT 0A01 EMPTY
SLOT 0A02 FULL
SLOT 0A03 FULL
SLOT 0A04 FULL
SLOT 0A05 FULL
SLOT 0A06 FULL
SLOT 0A07 FULL
SLOT 0A08 FULL
~
MAILBOX 1 EMPTY
DRIVE 1 SCSI_ID 5 FULL FROM 0A01
INVERTED
DRIVE 2 SCSI_ID 6 FULL
For a network-attached library,
the output displays a bar code
instead of the slot address.
The word INVERTED indicates
the media is B-side up in the
drive (assuming the media was
properly loaded into the library,
A-side up).
FULL indicates there is a volume
in the home storage slot.
On ADIC FastStor libraries, the
message says “FULL FROM
unknown so”