Filter
Top Products
Managing the AMASS File System
6-00028-01 Rev A Command Reference 3-129
volclattr
Define attributes for cleaning volumes. For more information
on drive cleaning, see the driveclean command.
Prerequisites
To prepare for either automatic or manual drive cleaning,
perform the following steps:
Step 1. Assign a cleaning volume to the cleaning group with
the volnew command for SCSI-attached libraries (or
bulkinlet command for network-attached libraries).
Step 2. Define drive-specific attributes to a cleaning volume
with the volclattr command. For the required
cleaning values, refer to your specific drive manual.
AMASS automatically defines the correct
drive-specific values for IBM 3590 drives. Do not
alter these values!
Note
If a library automatically performs drive cleaning, do not configure
a cleaning volume group in AMASS.
Note
Currently the CL volume group can contain only one
type of cleaning cartridge. For example, if you have
both a DTF drive and a 3590 drive, your CL volume
group must contain only DTF cleaning cartridges or
exclusively 3590 cleaning cartridges.