Filter
Top Products
Managing the AMASS File System
3-100 Command Reference 6-00028-01 Rev A
VolFlags
For more information,
see “VolFlags
Defined” on
page 3-102.
Status of volume:
• A = Active volume used by AMASS
• C = Volume is being volcomped or a
volcomp procedure has aborted
• I = Inactive volume not currently used by
AMASS
•K = Reserved
• O = Offline volume
• Q = Volume has been quick formatted
• R = Volume is marked as Read-Only This
occurs as a result of either: (1) a write error
that makes the media unwritable or (2) a
user has forced the media to be Read-Only
with the volreadonly command.
• U = Volume not formatted
• W = Media type is WORM
Volume Volume number
Volgrp Volume group assignment
Fields Description
Fields Description
Kbytes/Sec Average I/O rate for specified drive since
the last snapshot
NOTE: The value displayed by
sysperf
and
sysop is a transfer rate; on the other
hand, the value logged in the file is the
number of Kbytes transferred since the
last entry. These values will not agree in
real-time.