Filter
Top Products
Managing the AMASS File System
3-76 Command Reference 6-00028-01 Rev A
Output Examples
Following are examples of output generated by the idle eject
option.
Eject Value for A Drive
In the following example, we set the tape drive to eject idle
volumes after 480 seconds:
Eject Value for All Drives
In the following example, we set the drive to zero timeout; the
idle eject feature will be disabled for all drives.
# drivestat -e 480 1
Setting Idle Eject value for drive 1, juke 1, from
0 to 480 seconds. OK [y/n]? y
Drive 1, in juke 1, will eject idle volumes after
480 seconds.
Note
This example assumes the global IDLETIME parameter has been
set to zero also.
# drivestat -e 0 all
Setting Idle Eject value on all drives from 480
to 0 seconds. OK [y/n]? y
Drives will not eject idle volumes (feature
disabled).