Filter
Top Products
Managing the AMASS File System
6-00028-01 Rev A Command Reference 3-71
Reset to Zero
Use the setdrverr command to reset the error counts reported by
the drivelist command to zero. For syntax, see “setdrverr” on
page 3-86.
Example
Following is an example of output generated by this command
to obtain status on library number 3, which has two drives.
The output indicates that drive 1 of library 3 is Active and
marked as dedicated-write, and drive 2 of library 3 is Inactive.
None of the drives have any errors.
Output Fields Defined
The following fields are generated by this command:
# su root
# drivelist 1 3
# drivelist 2 3
DRIVE JUKE STATUS ERRORS
1 3 AD 0
DRIVE JUKE STATUS ERRORS
2 3 I 0
drivelist: 2 drives configured in this system.
Field Description
Drive Reference number
Juke Reference number