Filter
Top Products
Managing the AMASS File System
-28 Troubleshooting Tools 6-00028-01 Rev A
Library or Drive is Nonfunctional
A library or drive does not function as expected.
To correct, perform the following steps:
Step 1. Ensure that power is ON for the library and the
communications cables are securely attached to the
library and to the server where AMASS is installed.
Step 2. If the library control panel has a display area, check
for an error code. Refer to the User’s or Operator’s
manual for the specific library having the problem
for instructions for handling error conditions.
Step 3. Log in as root.
Step 4. If AMASS is active, run the command shown below.
For command information, see “amassstat” on
page 3-24.
Step 5. Run install_tests. This script will test library
operation and provide information on specific
failures. For more information, see “install_tests” on
page 4-16.
Step 6. If the problem cannot be resolved, contact your
hardware technical support representative.
# su root
# amassstat -f