Filter
Top Products
Mac mini (Mid 2010) Take Apart — Logic Board 117
2010-08-03
2 Make sure that at
least the top level
of RAM has been
removed. This is to
avoid the potential
for damaging the
EMI gasket on the
housing.
3 Remove 2 T6 screws:
• 922-9579
• 922-9575 (if not
previously removed
with the fan)
And 1 T9 stando:
• 922-9576
4 Remove the 2 mm
Hex screw on the
housing. This is to
reduce the possibility
of scratching the fan
channel area.
• 922-9574